Happy Friday Folks!
We're enjoying relatively mild temps here in Massachusetts this week and looks as if this trend will continue through next week. Let's hope El Nino gives us an easy winter this year.
Well, I've been slowly plugging away on current projects and finishing some tools up this week. Coming up will be steel Mini P15 Prybabies, a cool new titanium bead design for next week and maybe a SUSale or two. Just starting the milling on the new Krinkle ti Hangman tool as well. And I am working on a new round of drawings with some interesting directions for 2016.
Today I have a blast from the past! Old timers will no doubt remember the original Nibble and the closely related Sharkbite tools. I always liked that design as it is kind of a Keyton on steroids with a captive bit function added in. Anyway, the first Nibbles were made quite a few years ago, the batch was small and I thought it might be time for a reprise.
For this updated Nibble I decided for once to leave the original design relatively unchanged. I made a few small tweaks to soften the O-ring grooves and chamfer some of the corners but basically the design is true to the original.
The Nibbles are made of .160 thick CPM 154 steel and measure just under 3 inches long by 1.125 inches wide. In addition to the large main pry tip there is a smaller secondary pry/screwdriver tip on the bottom corner, a 5/16 wrench opening that doubles as a cap lifter and an oxygen wrench/lanyard opening.
Other features include the captive bit slot that will retain any standard 1 inch long by 1/4 shank hex bit. The bit is held in place by two large #204 O-rings and I am including a #1 or #2 phillips bit, whichever size I have on hand. A separate 1/4 hex opening will accept the bit and hold it in place with smaller #203 O-ring grooves. The bits fit tightly on most of these so the optional #203 O-ring is not necessary on most of them but I will include one anyway. Incidentally, I am including two full sets of O-rings so that you have a spare set as well.
Speaking of O-rings, to make the Nibbles flatter for shipping purposes I will give people the pleasure of assembling their own. This image shows the simple way to get the O-rings on. I really like this little trick and it can be used on any of my tools where there is an interruption that makes the O-rings hard to put on. Just slip a piece of string or paracord through the O-ring and pop it over the opening:
So not only do we have the Nibble reprise today but I played around a little bit with them too. There are a couple different combinations of grinds on them as well as a limited selection of my cool antique stamps. I have a few unstamped Nibbles in reserve as well for later but today I am offering the stamped ones.
The Stamped Nibbles will run $75 plus shipping and the link is below. There is a very limited number of these so it's one per person as usual. Thank you everyone and I hope you have a great weekend ahead!
Stamped Nibbles are gone, thank you everyone!
Absolutely awesome but low on funds this week...
Ok thats insane, sold out in less than 120 seconds?
These look awesome Peter. Can't wait to put one of these to use!
Wow, sold out after 3 minutes. Crazy fast!
well done and great work, very nice pieces.
If I am not wrong, they were out after 2min.
Unfortunately I missed that opportunity ..
Wow, Checking every five minutes and missed it!
Managed to get to the sales page, but got "Sold Out" after clicking Buy.
I need to click more quickly!
Wow, that was fast...
Great tool, looking for a gift for my oldest son. I would love to have one. 120 seconds is too fast though. I am bummed.
Oh man! Bummer I was sooo looking forward to these...
Really appreciate the SUSale's. Looking forward to those & a new bead.
Post a Comment