Blast From the Past: BitBuckets

Hello Folks, and Happy Thanksgiving Week,

It's a bright and mild morning out there today. The weather people have promised us cloudy skies for much of the rest of this week, but at least it should be snow free, for now.

Well I was looking for something in the shop this weekend and I came across a little pile of left over Titanium BitBuckets! I had totally forgotten about these handy little keyfob accessories...anyway, I have more than a dozen of the titanium ones with various two tone color finishes. I am running low on 1 inch hex bits so will toss a random Torx or Phillips in each one, but you can carry any combo of bits that you wish and there is room for two.

Titanium BitBuckets will run $70 plus shipping and the link is below. Thanks for checking in today and I hope you all have a lovely holiday week ahead!

All gone, thank you! 

 

Titanium Fleas

Happy Friday My Friends!

Another lovely day out there, typical cool temps for this time of year which will only reach the 40'sf. I will get out and about later when it warms up and soak up some of that low angle sunshine. 

Today I have a handful of Titanium Fleas for you. These were made a couple of years back and I still had a few kicking around. There are a couple with no anodizing but most of them do have coloring. Most are stamped as well, and there are some oddballs here. No lefties remaining...

Ti Fleas will run $65 plus shipping and the link is below. Thanks for coming by yet again, and I hope you all have a nice holiday week ahead.

Sold out, thanks again!
 

 

GearHead Beads

Happy Thursday Afternoon Everyone! 

I'm looking forward to this weekend having finally cleared my schedule of about a zillion things. Still got some leisurely reorganizing of my garage to complete, but no hurry on that. I'm also revamping my main tumbler in the shop, actually replacing it with a brand new one and I will fix the old one when I have more time, then I'll have two of that same type. Actually I have about 6 different tumblers of various sizes and for different purposes and they all have their places depending on the need. 

Well today I have the remaining titanium GearHead Beads for you. These were cut at the same time as the Bermuda Beads and were cut from textured material. These are all plain finish with no anodizing.

Textured Titanium Gearhead Beads will run $30 plus shipping and the link is below. Thanks for popping in today and hope your weekend is a good one.

All gone, thank you again guys!

 

Steel MiniBars

Happy Thursday Everyone! 

I'm back again with another little group of goodies for you. I have about a dozen of these CPM 154 steel MiniBars. They feature the open V notch style and some sweet milled decorative side grinds. A little extra length gives them more leverage than the Stubby version. These are all plain finish with no stamps.

Steel MiniBars will run $65 plus shipping and the link is below. Thanks for swinging by today and have a great weekend ahead!

Sold out, thanks so much!

 

Titanium Mini Poltergeists

Happy Wednesday Folks!

Bright and sunny skies continue here in New England. It's quite nice out there aside from the chilly breezes.

Today I have just a few Titanium Mini Poltergeists for you. These are mostly stamped and anodized, but there is one plain one available if anyone wishes to request it.

Mini Poltergeists will run $70 plus shipping and the link is below. I thank you for coming by today as always, and have a great rest of your week!

All gone, thank you!

 

Bermuda Beads

Howdy All,

Bright and crisp out there today. It was a good morning to finally tackle the leaky kitchen faucet that I have been putting off fixing for weeks. Replaced some parts and o-rings, and it is better but still not quite right. Must be the cartridge I'm thinking, so I will take it apart again and change that at a later date. 

Well today I have just a little batch for you. These are the remaining Titanium Bermuda Beads from a few years back. They are anodized a wide range of colors and make a nice little "stacker" piece to go with other beads on a lanyard.

Ti Bermuda Beads will run $30 plus shipping and the link is below. Thanks once again for slipping by, and I hope your week is shaping up to be a good one.

All gone, thank you!

 

Zirconium Mini Superbugs!

Good morning, and a Happy Monday to you!

It's bright out there this morning, a bit cloudy but there's supposed to be quite a lot of sun today. It's quite chilly though with highs only about 40f predicted, and very windy later this morning. So it is going to be cold out there today.

I spent much of the weekend going through odds and ends in the shop and on the shelves. Some stuff was already finished and other pieces needed further processing. My main tumbler needs some maintenance as it is limping along and that is something I will need to tackle later this week. But for now I have gathered up some small groups of items for you and that will take me through for a few days.

Today I have a handful of Zirconium Mini Superbug Tools for you. I made these little bit caddy tools a few years ago. They have a wide variety of stamps on them and feature a cap lifter and captive bit system. The torch blackened surface is extremely hard and will stay nice for years of hostile pocket wear. I ran out of Phillips screwdriver tips so some of these will have T-10 Torx bits as I had a few dozen lying around. But of course you can use any 1 inch bit you want in them. A handy little item that is easy to carry.

Zirconium Mini Superbug Tools will run $65 plus shipping and the link is below. Thanks for coming by today and have a great week.

Sold out, thanks very much!
 

 

 

Stamped Timascus Hangman!

Happy Friday Folks!

Looking forward to a nice weekend ahead, although definitely on the cool side. All my leaf blowing is done for the year and now I'm getting the snow blower ready for the inevitable.

Today I have a handful of gorgeous Timascus Hangman hooks for you! These all have stamps and vibrant colors. I do have one lefty available and also one V2.5 version with the pry tip so let me know if anyone wants one of those two.

Timascus Hangmen will run $80 plus shipping and the link is below. Thanks for popping in this morning and hope your weekend is stellar!

All gone, thank you folks!

 

Stamped Timascus Megas

Howdy Folks,

Well I've been grinding some tools this week. I'm close to finishing the steel Skeletaurs and will be sending them out to heat treat sometime next week, so a couple of weeks away from completion on those. Next up on the bench will be titanium PryDaddy Jr tools and they should go along pretty well once I get into them. I just completed a new drawing for a smaller version of the SupaWrench concept tool that I mentioned earlier this year but which has proven to be totally unaffordable to produce given the huge increases in costs for steel that I'm currently seeing. I'm still going to make them, and am aiming for completion this year, but in a smaller size and in titanium instead. Also underway is a batch of Zirconium Keytons and hopefully I will have those coming up in a couple of weeks. I have a few other smaller batches and groups of remnant items that I am gathering up and bringing to the finish line as well, so lots more fun stuff is coming up. 

Today I have a handful of Stamped Timascus Mega Hexy Beads for you. These have a wide variety of finishes as well as stamps. They will run $50 plus shipping and the link is below. As always, I really appreciate you stopping by today and I hope you have a very nice relaxing weekend ahead!

 All gone, thank you so much! 

 

 

Stainless Son of BeadThing

Hello from Cloudy New England!

Yes, it's another dark gray day, so common this time of year. We will see a bit more sun tomorrow and Friday it appears, but the temps are not going to get out of the 40's for the next ten days. Getting to be that time of year for sure.

Well today I have a little blast from the past for you. I found nearly two dozen 303 stainless steel Son of BeadThings hiding on a shelf in the shop. These big boys have some heft to them and can have multiple uses I hear.

Stainless Son of BeadThings will run $75 plus shipping and the link is below. Thanks for swinging by today and I hope things are rolling right along for you this week.

Sold out, thank you again folks! 

 

Timascus Megas with Dots

Happy Friday Folks!

It's bright and rather cheerful out there today, although a bit chilly. I'm enjoying it while it lasts and am still patiently waiting for the last oak leaves to fall.

Today I have a handful of Timascus Hexy Beads for you. These have the Satellite Dots and are anodized a wide range of colors. Timascus Hexies with Dots will run $45 plus shipping and the link is below. Thank you as always for checking in this week and have a great weekend.

All gone, thanks again folks!    

 

Stamped Stainless Steel GripCoins

Brrr...a Happy Thursday to you all from frosty New England,

It's chilly out there this morning and most of the leaves are now down. We're being serenaded this morning by the angry buzz of a chainsaw as the neighbor gets some of his trees trimmed. To be followed soon by a wood chipper I am sure... This happens from time to time but is an annoying side effect of living in a heavily wooded area. Definitely no sleeping in for me. ;)

Today I have two dozen of these small size 303 stainless steel GripCoins with rifle knurling for you. These were a project that I made several years ago and were originally meant for sticking onto tools or small electronics in order to provide a better grip. They also make for a neat little worry stone type of thing for a pocket...I am out of the sticky tape dots that I originally used for the backing, but they are easily sourced if you want to employ these buttons for that function. Or you could also use velcro dots if you wanted these to be removable. Or you could stick magnet on them if you wanted. Or, you can simply enjoy them as a worry stone. 

At any rate, this group has a wide variety of tiny stamps in the center. I also have two without stamps if anyone prefers that. 

Small Stamped GripCoins will run $50 plus shipping and the link is below. Thanks for coming by today and enjoy the weekend ahead.

All gone, thank you again!       

 

Steel Tiny Tims

Happy Wednesday Everyone,

Another gray and cloudy day out there today. It's supposed to be getting cooler and a bit windy tonight so I will need to finish up some outdoor chores later this afternoon and make sure to batten down the hatches so to speak.

Today I have a couple dozen of steel Tiny Tims for you. This is the tail end of the CPM 154 batch from last year with the distressed Dungeon Black finish and a wide variety of stamps. The pic below is old and I think all those are gone, but it is representative of the batch. There are no lefties, but I do have a half dozen non stamped ones as well if anyone wants to request them.

Dungeon Black Tiny Tims will run $65 plus shipping and the link is below. Thanks once again for popping by and have a great day!

Sold out except for a couple of plain ones, thank you so much!

 

Titanium Bookies

I'm back again. :)

I have a couple dozen Titanium Bookies done this afternoon. These are cool little bookmarks and would make a nice gift for the readers in your life. This is the last group of them. Titanium Bookies will run $45 plus shipping and the link is below. Thanks as always, and hope your week is going great so far.

Sold out, thank you so much! I will have some more of the older titanium blade style Bookies later this fall...

 

 

Flat Ti E115s

Howdy All,

Nice crisp fall day shaping up here. I'm slowly adapting to the time change but I really wish they would stick to one or the other instead of this darned change every year. I understand the arguments for and against, but it's a nuisance. Oh well, they probably never will resolve it and we're always going to be stuck with it I guess. 

Today I have just a handful of the flat Titanium E115 tools for you. A super light weight backup for your wallet or a minimalist key ring. They will run $45 plus shipping and the link is below...thanks for coming by today and have a great week.

Sold out, thanks again everyone!

 

Titanium Pocket Squares

Happy Monday!

It's a little overcast out there this morning. We're definitely headed into the cold gray part of the year which is really not my favorite because I am a naturally sunny kind of guy. But the good part is that this time of year forces me back indoors and so I tend to get lots of work done. 

Today I have a couple dozen Titanium Pocket Squares for you. As before in the previous batch, these are stamped and contrast anodized with a wide variety of images and colors. I do have a couple of plain non colored and unstamped ones if anyone wants to email me for them, but no lefties...

Ti Pocket Squares will run $85 plus shipping and the link is below. Thanks for swinging by today, and I hope your week ahead is a great one.

All gone, thank you!