MetWrenches Return

Howdy Folks,

The lovely fall weather is upon us at last. The sumacs are starting to turn red and here and there the maples are turning various shades of yellow, orange and red too. But I would say we are still at least a week or two away from the peak foliage. Hopefully it won't get rainy and windy and ruin the show too soon this year.

Today I have more of the S30v Metwrenches done. These are the same as the last batch, nice chunky .160 stock and again, they have the odd number metric sizes from 5-15mm. These tools had a long series of tumbles in a variety of media types which softened the edges and left them with a lovely feel in the hand. Definitely an heirloom tool.

The Metwrench batch isn't huge so it will be a one per customer sale. They run $60 plus shipping and the link is below. As always, thank you for stopping by!

Sold out for now, thank you again everyone!

BitBucket Keyfobs

Hi Folks,

Well, the weather forecast looks a bit ugly today so I'm going to sneak this sale in early and hope that I get all the labels done before we may have to shut down the computers or possibly lose power. Supposed to be severe thunderstorms with high winds but we'll see...so far we have been really lucky this year, unlike in years past.

As you all know, I spend a lot of time coming up with new product ideas and this is one that I have been mulling over for a long time. I'm happy to finally bring it into reality. The concept is very simple and I think the solution is quite elegant. I wanted an easy and unobtrusive way to carry extra 1/4" hex bits and this method came to mind. The BitBucket is 2.5" long by 1/2" diameter container, same size as my whistles and the ribbed design is very similar. Two standard 1 inch long hex bits will fit inside and they are retained with a #1 NiteIze S-biner clip for easy on and off access. Or you can put the BitBucket directly onto your keyring although the bits are then not as easy to get to.

At any rate, the aluminum BitBuckets are anodized with a warm bronzy gunmetal colored finish and are supplied with #1 and #2 phillips bits and a black S-biner clip. Of course you could put any bits you want in there ranging from torx to metric (4mm and 5mm bike) to any of a multitude of specialty bits that are available through a simple internet search. The first wave of these is aluminum but there will be another wave of aluminum ones up the road in a different anodized color. And there are titanium BitBuckets being turned right now. Perhaps a few others may show up in other materials as well.

BitBuckets run $55 plus shipping and the link is below. If you don't see the link that means that the sale is over and they are sold out. Thanks again for stopping in folks and hope you have a wonderful weekend ahead!


BitBuckets are Sold Out for now, thank you again!

 

More G2 Ghosts

Howdy Folks,

It's feeling like Fall is right around the corner today...the weather suddenly cooled down 15 degrees since earlier this week. Won't be long before the leaves start turning. Where oh where did the summer go?

So, projects are proceeding right on schedule. More Metwrenches will be returning from heat treat probably around the end of next week. I am close to finished on the rest of the ti Dreadknots and should be able to get those together in the next few days. In addition, the first wave of the new round item, the BitBucket(TM), will be coming back from the anodizer probably early next week and those will be quite interesting. Ti ones to follow as well and perhaps some other metals. More news on them when I actually get some finished examples in my hand.

Today I have a few more S30v steel G2 Ghosts done. These are the same as the previous waves: stonewashed, no variations, no stamps, etc. I have more on the schedule as well so there will be several more waves finished here and there through the autumn. Hopefully a lot more people will get a chance at them.

Anyway, the G2 Ghosts are $60 plus shipping. Purchase link is below...thanks once again everyone and I hope your upcoming weekend is a great one!

This wave is mostly gone for now but more coming soon. Thanks as always everyone! 

M is for.....Metric!

Hi Folks,

Thanks for patiently waiting for new releases these past couple of weeks. I've been working steadily on numerous projects and have made a huge amount of progress. It's looking like September will be the busiest month of the year so far with a couple of brand new offerings and also some older ideas brought back to life. Exciting stuff is on the horizon once again!

I had mentioned today's tool on the Facebook group last week but didn't have a finished one on hand to post a picture. At any rate, I'm very pleased to bring this one back from the dead. Several years ago I made a series of tools called the Atwrench which many of you probably remember. I did a bunch of SAE version tools in steel and also made a few titanium pieces. Then I decided to do a metric offering and I made just one small batch of them in S30v steel. Needless to say, those metric pieces have been in high demand over the years and I have received MANY requests for another run of them or to make a brand new metric tool.

Well, for the past several years I have had an old titanium Atwrench sitting on my kitchen counter and it is a constant reminder to me of how handy this tool is. I have used it to pop more than a few beers of course but it has also been useful as a pry tool on numerous occasions. At 3.25 inches long (82mm), the size is perfect and the ergonomics are very satisfying indeed.

So earlier this summer I was going through some older drawings and I came across the Atwrench and Metwrench designs and it was yet another reminder to me. The time is definitely ripe for a revival of these great tools.

For this version I have left the original odd number Metric size wrench set in place. Wrench sizes are 5, 7, 9, 11, 13 and 15mm. Up the road I may do a variation and try to include the most ideal frequently used sizes only but I'm not there quite yet. For now, the original wrench set will have to suffice.

Anyway, I played around for days with various configurations and ended up with a rather nice design update. This new tool features more aggressive, deep cut crenallations on the edges for a secure grip. The cap lifter is perfectly sized for smooth single pop action and I moved the distinctive "M" to the small end of the wrench set so it is less obtrusive and much stronger. Careful chamferring on all corners and edges ensure the most comfortable grip possible and indeed, this tool will melt into your hand. They are made of .160 S30v steel so have plenty of heft to them and they have been thoroughly tumbled to a nice stonewashed finish. All in all, a very satisfying tool and one that you will really enjoy carrying.

This is the first wave of the double sized batch. The other half of the batch is at heat treat right now and will be back in about two weeks. In addition, a double sized batch of SAE Atwrenches with the exact same footprint have already been cut and are getting surface ground next week. So the first of those will be coming in about 4-5 weeks. Lots of Atwrenches on the horizon!

The Metric Atwrenches will run $60 plus shipping. It's a one per customer sale and I'm doing this one early in the morning so our European, Aussie and Asian friends have a chance at them....
no worries, the next wave will be at a more West Coast friendly time, I promise. ;)


First wave is sold out, thank you so much!

                

Anodized Ti DreadKnots

Hi Everyone,

Raining like heck here today and quite humid. We'll survive I'm sure, but it makes for a gloomy summer day.

Speaking of gloomy, the light is lousy so I apologize in advance for the crummy pics below. Couldn't find good light today to get the colors looking right...anyhow, today I have the first wave of titanium DreadKnots done. These came out very nice. I have anodized them in various color combinations, mostly rainbows and color fades although there are a few solid colors in the mix as well. Basically though they are mostly all different and unique so I will send you whatever I send you, no color choices this time around.

I've been working on a second batch of ti DreadKnots to be finished shortly and those will probably be a plain stonewashed batch, we'll see what I feel like doing and what I have time to get done.

The ti DreadKnots will be $60 each plus shipping...The batch isn't huge so it will be one per customer on them please. The link is below. Thanks for stopping in as always and I hope everyone's summer is going great!

All gone for now, thank you!

Stainless BedBugs

Hi Folks,

We're heading into another hot and sticky summer week here in the northeast. So I figured I better get another sale in today since I'll probably not be very productive for the next few days.

Today I finally have the small batch of stonewashed 316 stainless steel BedBugs done. These have been sitting around for several months and I just haven't had a chance to get them finished up and packaged until now. Anyway, the BedBug series are nifty little bit caddy tools and they make nice keyfobs or zipper pulls for your gear bags. It's a tiny batch so one per customer please...have a wonderful rest of the weekend and stay cool this week!

Sold out, thank you so much everyone!

Time to Tie One On!

Hi Folks!

I hope everyone is having a terrific Independence Day holiday weekend. It's in the 90's F. here with high humidity so definitely the dog days of summer...

As mentioned previously, I've been very busy lately with new drawings and getting new projects underway. Today I have the first wave of one of those projects ready to go...

I designed this new tool with two groups in mind: the paracord/knot tying crowd and traditional sailors. The DreadKnot is an ultra compact 3 inch pocket tool that features a universal shackle key for loosening those thumb screws found on the U shaped shackles on sailboats. lt works very well for working standard wing nuts too. Also featured is a small marlin spike which I have intentionally left just a little bit blunt but still quite pointy. Fantastic for loosening tight knots in either paracord or ropes! And of course it has a cap lifter and a 1/4" hex opening.

Because I envisioned this tool going to sea, corrosion resistance is an important consideration in the choice of materials. I chose 5/32" thick 316 stainless steel for the first batch as it is excellent in salt water environments. The second batch will be coming in a week or two and they will be in titanium.

The DreadKnots will run $55 plus shipping and it will be one per customer on them for this small first wave. I will be making a bunch of these as time goes on so expect a few releases and possibly a 4 inch version as well up the road.

Thanks for stopping by today and stay cool folks!


All Gone for now, thank you folks! :)

  

Short Wave: G2 Ghosts

Hi Everyone,

It's a hot and lazy weekend here. Actually not too hot but quite humid so it feels hotter than it is. Although I could waste the whole weekend lying around and watching the Red Sox while drinking a cold beer, I thought instead maybe I should be productive, sneak a little sale in and then catch the last few innings.

Today I have another small batch of G2 Ghosts ready to go. These are S30v with a stonewashed finish. There are still tons more of these to go as soon as I can get the time and energy to grind them and get them out to heat treat. Then there will be several huge waves of 3v Ghosts after those. Lots of grinding ahead for me in July.

Anyway, the purchase link for the Ghosts in right above the picture. They are $60 plus shipping... Newbies: If you don't see the link that means you were too slow and the sale is over. Thanks for stopping in folks. Stay cool this weekend!

Sold out for now, thank you everyone!

Rest of the S30v Cryptos

Hi Folks,

It's a hot and muggy week here in western MA with temps around 90F. It's a good week to hunker down in the relatively cool basement and get a few things done. 

So today I have the first wave of S30v steel Cryptos done. These are .160 thick so they are nice and chunky. SAE wrenches sized 1/4-9/16 with Prybaby(R) front end.... Due to the compact yet beefy size of this tool, they have a pleasing weight to them, around 1.5 ounces. On this batch of tools I decided to reverse direction and put the grinds on the opposite side rather than the way I did the titanium version. These have had the V notch milled into them as well as the extra grinds and they are hardened to 57-59 Rockwell with cryo treatment. The finish is a fine stonewash with a slightly subdued shine. 

The S30v Cryptos will run $75 plus shipping and the purchase link is below. As always, I greatly appreciate everyone's interest so thank you for stopping by and stay cool!


All gone for now, thank you everyone!

G2 Ghosts with Stonewashed Finish

Hi Folks,

It's been a little quiet around here lately but that's about to change. Things are shaping up nicely, lots of goodies are on the horizon, and indeed it's looking like a very busy summer lies ahead.  It's been good to have some long stretches of recent shop time and much preparation has been getting done.

Today I have some more of the stonewashed G2 Ghosts finished. These are the same as the first batch, all S30v steel, .160 thick with regular grinds. There are a lot more of these on my bench now, still in the process of being ground and sent to heat treat so this is simply the next of several forthcoming waves. They will run $60 plus shipping and the purchase link is below. Thanks for stopping in and I hope everyone is having the same lovely weather we have here in the Northeast this week!

These are gone for now but more soon. Thanks Everyone!

Emails Sent!

Another remarkable turnout, thank you so much everyone. It's a shame I don't have enough to send everyone an email but I did just send them to the lucky 8. (5:15 EST cut off time) Please check your emails, and your spam filters...thank you once again for your interest and for your patience. Eventually I will get a big batch of stuff together and get some regular general release sales going again but for now it's just these little ones for the odds and ends.

Thanks again and have a great day!

All are spoken for, thanks again!

Rainbow Wedgie Flash Sale, One Sign Up Per Person!

So, everything finally got squared away last night with my site, at least I hope so anyway...sounds like there were denial of service attacks against several big internet providers this week. I guess this is one of the hazards of this new digital age.

One Sign Up Per Person Please!

Well, today I have another little Flash Sale for you. This time it's the last of the titanium Wedgies with raw bar finish. These have a special surface treatment on the raw bar which gives it a bit of added shine. They are all anodized rainbow. I believe this is the end of the ti Wedgies and at the moment I have no plans to make any more of them so this is your last chance to score one directly from me. There are only 8 of these tools available. 

One Sign Up Per Person Please!

Anyhow, the ti Wedgies will run $65 plus shipping and the Sign Up link is below. The Sign Up period will be 30 minutes (ends 3 PM EST) and the response time for the buyers will be 2 hours. If you sign up please remember to check your email including your Spam Filters as people keep signing up and then not getting back to me after I email them. I'm giving a reasonable length of time to get back to me so remember, you will forfeit your chance if you don't respond within two hours and then someone else will get the chance to purchase.   

One Sign Up Per Person Please!

And in case you didn't get the message, one sign up per person please! I will simply discard all multiple entries including the first entry for the abusers who submit a half dozen.  ;) Thanks!

Flash Sale is over, emails with instructions to purchase will be sent to the 8 buyers shortly, please check your emails and your spam filters! Thanks again Folks!

Site is Down...

I did hear back from two people before my site went down. It's been down for at least an hour now and I can't even get hold of anyone in tech support at the IP so they must be having some major issue... So I will extend a grace period for the remaining two folks until my site comes back online...

Emails Sent!

Wow, over 500 people signed up in just a half hour, amazing! Emails sent to the 4 folks...they will have two hours to get back to me (4:30 EST) and if anyone does not get back to me I will pick replacements. Thank you everyone!

They Call It Stormy Monday...

..but Tuesday's supposed to be just as bad. Yo Mother Nature, what's up with all this rain lately? :)

Hi Folks!  I've been busy grinding and tumbling all this past week. I just sent out a big batch of S30v G2 Ghosts to heat treat and so those should be back in about two weeks. I also sent out a batch of beefy S30v Cryptos to heat treat. Next week another batch of both tools will go out as well so there are TONS of tools coming just as I promised. It's taking a little while to get them going which, as anyone knows who has been following the Atwood Circus for any length of time, is pretty much always how it is.

Anyhow, fun times at Atwood Knife and Tool. I have had several weeks of very productive drawing time in between all the grinding and there will be some promising new designs coming as the summer goes on. It's a funny thing about drawings...months can go by and I start to think I will never have another cool idea and then all of a sudden a bunch of interesting stuff will come to me. Some ideas are viable and have "legs" and others sit there and fester for a while before ultimately being discarded or put on the back burner. I think a couple of the recent ones are a definite go though, so as soon as I figure out the details and settle on materials, etc. I will be letting you know.

Today I have a little Flash Sale for you. These are old stock titanium Prybabies (R) and are the last of them. These have a light glass bead finish and are anodized rainbow. There's only 4 of them. They will run $70 plus shipping and the Sign Up portion of the Flash Sale will run for 30 minutes (ends 2:15 EST), the response time will be 2 hours. So if you sign up for this today, please do check your email and your spam filters after the sale is over and I have sent out the emails.

As always, thank you for your patience and for the great interest in my little creations!

Sign up is over, will send emails out shortly to the 4 buyers. Thank you!

Round Two Emails Sent!

OK, I didn't hear back from a few folks so I just sent out the second round of emails for the few remaining blue Cryptos. Response time will end at 8:35 EST. So check your Spam filters just in case! Thanks.

All spoken for, have a great evening folks!

Emails Sent!

OK, that was quite a few that signed up in 30 minutes, amazing!

So, emails have been sent out and response deadline is 5:15 EST. Thanks again and have a great afternoon!

Flash Sale: Blue Cryptos

Hi Folks,

Last weekend we were freezing, now we're broiling in the 90's. Crazy weather...

Today I have a few more titanium Cryptos done, this time anodized a deep blue. The sun was out this morning when I snapped this picture so leaf shadows are not included, you'll have to supply your own. Hehe..

OK, so the blue ti Cryptos will run $70 plus shipping. There's only a couple dozen so we'll do this as a Flash Sale. How about we make this for a 30 minute sign up period (ends 2PM EST) with a generous 3 hour response time so that folks have a chance to check their emails? The link to sign up is right above the picture and if you don't see a link there then that means the sale is over and you can no longer sign up for this item. Thanks for stopping by everyone and have a terrific weekend!

Sign up is over, I will send emails shortly and announce the start of the response time. Thank you everyone!

Golden Cryptos!

Howdy Folks,

I hope everyone had a great weekend! It started out quite cold and rainy here in New England and then finally turned nice yesterday. Odd weather this year though for sure...

Well, the weekend started out so lousy that it seemed like a good time to get a bit of work done. So today I have a few more of the ti Cryptos finished. These are stonewashed and are anodized a lovely rich gold color. They will run $70 each plus shipping and the link is below...it is one per customer on this sale as there aren't too many of these but I wanted to do them in a regular sale rather than a flash sale to keep things mixed up. Thanks for stopping by today and have a great short week ahead!

Gold Cryptos are Sold Out, thank you again folks!

Second Round Emails Sent!

All spoken for, thank you again everyone!