Ti BedBugs

Hi Everyone,

Just want to say up front that I really appreciate all the interest and support this year, you all have been unbelievably kind and generous. I'm extremely fortunate to have so many fine people collecting, using and enjoying my crazy little creations. Thank you so VERY much!

Today I have some titanium BedBugs finished. These are very light and handy little guys. They have a plain stonewashed finish and come with #1 Phillips bit, two sets of #204 O-rings and a stainless #.5 S Biner from NiteIze. I may not bother to make any anodized titanium captive bit tools partly because fresh O-rings tend to leave a little bit of oily residue on the metal which dulls the colors slightly and is tough to clean. Anyway, they're great just the way they are so I'm not going to worry about it.

Titanium BedBugs run $45 plus shipping and once again it will be a limit of two on them. Probably it's too late to get anything there before Christmas given the tremendous volume of packages and the delays that are already underway with the post office. Regardless, I hope everyone has a wonderful and relaxing Christmas and all the best for 2013!

These are gone for now, thank you so much!

Wow!

Holy Smokes, that's a lot of people! Thank you all so much for all the interest, it's very much appreciated!

Ok, so drumroll please....and the winners are:

9 kibitz
32 Acolon
140 GSRPh
149 Bhenning
249 ksj2110
253 Occ Doc
293 Wilko
579 Marcrothe1
607 Eaty2k
643 pleasepickme
829 fast freddy
836 Conorb

Congratulations to the winners and thanks again to everyone who signed up! I'm sending out emails right now. 

SnakeBite SUSale

Howdy Folks,

It's rainy and gloomy here this week but that's better than a foot of snow so I'm not complaining too much. So far we are getting off pretty easy this winter.

Today I have a small number of SnakeBites done. These are what remains from the old batch that I made several years ago. They are 5/32 (.160) S30v with stonewashed finish and come with kydex sheath and bead chain. They make a great little neck knife or pocket tool kit.

I have just 12 SnakeBites available. They will run $185 plus shipping and the sign up link is below. Since we are getting close to Christmas I think Express Mail is the way to go on these so within US it will be $15 and for International it will be $35. 

One Entry Per Person Please! If you are not familiar with the SUSale rules please reread them here:

Sign Up Sale Rules

The SnakeBite SUSale will run until 7PM Eastern Time tonight, December 18th. I will end the sign up at that time, remove the sign up link, and send emails to the winners shortly afterwards. Thanks for stopping in and I hope everyone is gearing up for a great holiday season!

SnakeBite Sign Up is over, thank you so much folks! I will post the list of winners and send out emails to them shortly. 


List of Folks Who Have Entered

Stainless Count Sporkulas

Howdy Folks,

Well I'm working my tail off trying to get a few more sales in this year. I've had some unfortunate delays and setbacks this holiday season so am not getting quite as much done as I had wished but that's OK...just means there will be more items available for January. :)

Anyway, today I have some more of the Count Sporkula tools done. These are the 301 stainless steel ones. There are a couple of stonewashed pieces but most of them have a light glass bead finish on them. These are great wallet tools and would be perfect little stocking stuff type items. They run $45 each plus shipping. I'm going to limit to two per customer as the batch is sizable but not huge and I did carefully check the sales page this time to make sure the limit is set to two. My apologies for all the confusion earlier this week!

Stainless ones are gone for now, thank you so much everyone!

Bronze BedBugs

Good Morning Folks!

It's a cold, rainy and dreary day here but at least it's not snowing. Great day to hunker down with a hot drink and do a sale.

This is a new item that I've been planning for a few months. The BedBugs are a simple bit caddy tool and a good excuse for me to get to play with a variety of materials. Because of the simple design I can use some metals which are a little softer than usual since there is no pry function or cap lifter to get chewed up. So the first wave of these are in warm and lovely bronze, alloy 510 which is a spring tempered bronze. These are already beautiful but will develop a great patina over time. I encourage you to handle these frequently, get them wet, spill stuff on them, rub dirt into them and ding them up because they will just get better and better looking as time goes on. I can't wait to see what they look like in a year or two.

Other BedBugs will be coming over the next weeks and months as well and some of the other materials will include titanium, naval brass and 316 stainless steel so there will be some interesting variations coming. BTW, some of the Atwood Scholars may note that I made a couple of little sample tools last year which I called BedBugs but I decided not to go forward with that design...I didn't want to waste a great name so I thought it would be a perfect fit with this little tool. ;)

I'm on a campaign to save my fingers this winter so I decided that instead of putting all these together I would let you all have some of the fun...hehe. So these will ship with a little bag containing two sets of rubber O-rings, a #1 Philips bit and a small NiteIze S clip and you guys can put them together yourselves. I love these little clips btw and you'll be seeing them again as I have some other tools I want to use them with up the road. Definitely handier than a lanyard for certain things.

The BedBugs will run $45 each plus shipping and I'll put a limit of two per customer on them so hopefully a few more folks will have a chance to pick one up. As always, thank you so much for stopping by and I hope everyone is having a great week so far!


BedBugs are Sold Out for now but I have lots more coming so no worries! Thank you!

Plain Titanium G5 Prybabies

Hi Folks,

Well, it would seem that the holiday season is upon us once again. I thought it was just here about 5 minutes ago but the time sure is flying. It doesn't quite feel like December here either because we still don't have any snow but that's fine by me. It will be here soon enough...

Things are cooking along at a reasonable pace despite a few recent setbacks. I'm grinding some new Mystery steel tools this week and hope to get them further along over the weekend. If all goes well those tools will be going to heat treat early next week so should be back the week before Christmas. A second new tool design, which does NOT require heat treat, is being cut today and Monday and those will be coming perhaps as early as next weekend. So there is lots of cool new stuff on the way shortly!

Today I have more titanium Prybabies done. I decided to leave these with a plain stonewashed finish and so none are anodized. No stamps or grind variations either, just plain Janes because there's a lot of people who like vanilla. I should know, I'm one of them! :D There will be stamped Prybabies, more anodized Prybabies and probably eventually even some patterned ones coming but it won't be until next year.

For the newbies just a reminder, the ti G5 Prybabies feature a pry tip/wire stripper notch, bottle opener that doubles as a 5/16" wrench and a set of SAE wrenches ranging from 1/4-9/16", all in a compact package that is just over 3 inches long and is 5/32 (.160") thick.

The plain ti G5 Prybabies run $65 each plus shipping and I'll make this sale a limit of two per customer please. International customers: You have a choice on this sale, one item can be shipped via either Priority International for $17 or Express mail for $34. If you order two then they will automatically ship via Express Mail.

Thanks for stopping in folks, always appreciated!

These are all gone for now, thanks everyone and have a great weekend!

And the Winners Are...

Wow, another great turnout. Amazing stuff...thanks for signing up for this one!

OK, the winning numbers are:

 9     Rlyle531
53    Speed Racer
192  BusyBadger
197  Roylee
286  the grizz
320  NeonEcko
365  Boricua
368  kemtitec
417  Gschaffner
425  Kaos
524  p8r1ck
541  JaredC

I'll send out emails right now, thanks again and have a great weekend folks!

SUSale: SlotShots

Hi Everyone,

Well, the OD whistle SUSale was such a success yesterday that I thought we might as well keep the ball rolling with another sale...this time I have dug deep in the Atwood Archives to bring you another blast from the past!

Today I have twelve 303 stainless steel SlotShot cups. These are the old school diamond knurled BigShots with three milled slots that will accept the small tritium tube markers, users to obtain and install the tubes themselves, if so desired. These are gorgeous cups and I can't believe I had these hiding in a box down in the shop, totally forgotten about. They even have the little dice with each cup.

So, the 12 SlotShots will run $75 each plus shipping. International customers will have to pay $35 for Express mail due to the weight, I don't want any problems with customs and tracking issues and you know these are going to be checked out since they weigh so much (1/2 lb each).

Let's make this one a little earlier...The SlotShot sign up will run until 6PM Eastern time this evening, Saturday 24th. Winning numbers will be drawn at that time and emails sent. Once again, thank you so much for the enthusiastic support and interest, I can never thank you all enough!

Sign Up Sale Rules

Sign Up is over, thank you once again everyone! Will post results shortly...


List of Sale Participants

Wow!

Holy Smokes, I know I've said it before on previous SUSales, every one of which always seems bigger than the last, but I'll say it again: Amazing turnout for these!

OK, after going through and pruning doubles (ahem) the numbers were drawn and are as follows:

26 Ansel1
131 Samson
231 rab4
239 Daniel Jr Castonguay
282 Giovanni
302 Lucasbartends
394 omegahpr
415 JohnS
455 dj jazzy reff

I will send emails out right now to the winners. Thanks once again folks, really appreciate all the support!

OD Green Aluminum Whistles SUSale

Howdy Everyone,

Hope your Thanksgiving was a good one! I ate too much as usual and then watched some GREAT football games so it was a pleasant and relaxing day for me.

Ok, so it's been a long time since I've done a Sign Up Sale. I have several regular projects underway but due to unforeseen delays they are taking forever to get finished...so in the meantime I thought perhaps a little SUSale action would be just the thing to break the monotony.

For those folks who are more recent fans and have not encountered the SUSale system before please familiarize yourself with the rules and also, remember that it's ONE ENTRY PER CUSTOMER please. We carefully go over the list and any duplicate entries will be deleted at the end before the random numbers are selected so don't be "gaming" the system here!

Sign Up Sale Rules 

Today I have something really special and very old school. These were leftover from a run of whistles that were made about 6 or 7 years ago, back from the very first run of whistles. At that time I wanted to use mostly just stainless or brass to make whistles. However, the guys at Amherst Machine stuck a bar of aluminum in the machine and turned a dozen plain aluminum bodies as a test to prove out the design before running the rest of them. I sold a couple of these plain unanodized aluminum oddballs over the years but hung on to the rest. Earlier this year when I sent out the 5 rib Longslides for anodizing I decided to throw in these whistles as well and finally get them finished up.

So, there are a total of 9 Olive Drab Green Aluminum Rifle Knurled Whistles available. Eight of these are on Dungeon Finish matte bead chain. There is one more that has the lanyard hole drilled at a funny angle and that one is on a keyring, so it's a true one of a kind setup piece.

The whistles will run $50 each plus shipping and the sign up period will end tonight, Friday 23rd at 8PM Eastern time so get your entry in before then. The winning numbers will be announced shortly after 8PM and at that time I will send emails and purchase links to the winners.

Sign up period is over, thanks so much to  everyone who entered! List will be coming shortly...

List of the Folks Who Have Entered

Sandy and Updates

Hey Folks, people keep emailing me and asking how I'm doing after the storm. I appreciate the concern! The answer is, that we only lost power for two hours.... so we got very lucky and the storm missed us for the most part. No damage here whatsoever. I do feel pretty bad for the folks in the low lying areas of NY and NJ. My best wishes to them and I have made a small contribution to relief efforts. Hope they get things straightened out soon!

On another note, I'm working on some new drawings and designs this week. Also preparing for some batches and lining up materials and cutting schedules. It's going to take a little bit for me to get the next batches of items together but I think you all will really like what is around the corner! :D

Have a great weekend and stay safe.

Storm Sale: Red Longslides

Hi Folks,

Everyone around here is hunkering down today and preparing for the storm. I am pretty confident that we will just get a moderate amount of rain and some wind and I really think the worst of it will be passing well to the east of us. I feel sorry for folks near the shore and mid Atlantic states though and am hoping for the best for them...

Anyway,  I thought while we're all sitting here waiting for the world to end that I might as well do a sale. Today I have the remaining Aluminum 5 Rib Longslides done. I've been saving these for last and they are simply stunning...these are anodized a brilliant red and I have tied them onto a pale moss colored cord. They will run $25 each plus the shipping, order link is below. Thanks for stopping by today and be safe everyone!

Longslides are Sold Out, thank you so much!

Green Titanium Prybabies(R)

Howdy Folks,

Well, it's great weather here, mild 60F temps and sunny this afternoon. So I'm probably nuts to spend the day sitting inside and doing a sale but I have a feeling you will really like what I have coming today. Besides, I want to get these on their way before the End of the World, er, that is, the 2012 Frankenstorm, hits us early next week.

Today I have the first wave of Titanium G5 Prybabies(R) ready to go. These are just gorgeous with a sugary textured stonewashed finish and bright green anodizing. I will be doing numerous waves of these over the next few months and will do more colors, stamps and perhaps patterning on subsequent batches but these today are all just plain green. They run $65 each plus shipping and since it's not a huge batch I will make it one per customer. Thanks for stopping by and I hope everyone has a great weekend coming up!

Sold Out! Thank you VERY much and have a nice weekend folks!

G5 Semi Roid Prybabies

Hi Everyone,

Well, it's definitely getting cooler here and the leaves are falling. Not much color again this year so a rather poor showing, probably due to the dry summer and odd weather in general...

So today I finally have the rest of the CPM 3v "Semi" Roid G5 Prybabies done. These are the second half of the earlier batch so are the same thickness, 3/16. I did more prep work on these and got them tumbled out nicely so they have a nice stonewashed finish on them. Why some of the earlier ones had a reddish haze on the inside edges after heat treat I am not sure but these do not have that at all for whatever reason.

There are no special grinds, stamps or any other variations of these whatsoever, they are all straight up with standard extra grinds on the pry tip. As usual, the batch is not large so these will be one per customer please.

The Semi Roid G5 Prybabies are ONE PER CUSTOMER PLEASE! They run $70 plus shipping and the link is below. Thanks for stopping by!

G5 Semi Roids are Sold Out, thank you!

Stamped Roid Keytons

Hi Folks,

It's a dreary drizzly day here so please pardon the crummy picture, the light is lousy and it's certainly not my best image...

But anyway, despite the melancholy weather I managed to get the rest of the S30v Roid Keytons done this morning. These are stamped with my antique diemaker stamps and they are mostly different so I'll send you what I send you, no choice of stamps.

The Stamped Roid Keytons run $75 plus shipping and as usual the link is below. There are even less of these than the plain ones so it's a ONE PER CUSTOMER sale please, no exceptions, thank you!

Roid Keytons are Sold Out, thank you so much!

Roid Keytons

Hi Everyone,

It's rainy and chilly here today, good day to stay inside and finish up some tools.

Today I have the first wave of S30v Roid Keytons ready to go. These are .210" thick so they are very close to 1/4", quite massive. These are the first G2 Keyton design so that tells you how long they have been sitting around before I finally got into working on the batch...over a year in fact! But done they finally are and all the extra time and care that I gave them shows in the buttery smooth final finish.

This is a ONE PER CUSTOMER sale please as the batch is not nearly as large as I wish it was. So, they will run $70 plus shipping and the link as always is DIRECTLY above the picture below. If you see the words SOLD OUT instead of the link that means that I took the link out and the sale is over. I know the old timers all know this but I get dozens of emails every week asking where the link is. Anyway, have a great weekend folks and thanks for stopping in.

Roid Keytons are Sold Out, thank you!

Three Rib Brass Lanslides

Hi Folks,

It's the first day of fall here in New England and the weather is suddenly a bit cooler. The leaves are barely showing any color yet but I'm sure in another week or two that will all change. It's a good time to get some work done right now though.

So, this weekend I have some brass Lanslide beads finished. These are the full sized 1/2" diameter ones in the Three Rib design. They have a great heft to them and are perfect to tie onto tools, knives, flashlights and zipper pulls. They are the usual $15 plus shipping and the link is below. Thanks for stopping by today and I hope everyone has a nice relaxing weekend!

All gone for now, thank you so much everyone!

Old Yeller

Hi Folks,

Sorry for the long radio silence. I've been battling a persistent cold/flu that had me laid up for a few days and I'm still trying to shake the last of it. Then, this past week I was busy grinding, tumbling and processing parts for literally the entire week. The upside of all this is that I finally got those long overdue S30v Roid Keytons off to heat treat on Saturday. The rest of the 3V Semi Roid G5 Prybabies went to heat treat today. So, in about two weeks or so I will have TONS of heavy duty steel tools.

There are some other cool things in the works as well. It's still too early to talk about a couple of the projects but I can mention one that is a definite go and is already underway...remember how on my G5 Prybaby cards it says "made of steel or titanium"? Well, I finally got around to doing a batch of titanium Prybabies! So those will be coming in around a month or so. I'm very excited about them and have wanted to make some for quite a while as it is one of my all time personal favorite designs.  

In the meantime I also worked on the rest of the titanium G2 Keytons over the weekend. Today I have a batch of them done with stonewashed finish and deep gold anodizing. They run $65 plus shipping and the link is below...thanks for your never ending patience and interest, much appreciated!

Gold Ti Keytons are Sold Out, thank you! 

Patterned Ti Wrunts

Hi Folks,

Happy Friday! Hope you all are gearing up for a nice relaxing Labor Day weekend. It's going to be a beautiful weekend here and I'm looking forward to it.

So I'm getting things heating up here a bit and starting to get projects moving forward. My time off slowed things down but I'm getting braced for the upcoming fall season... I've got some ti stuff coming today and over the next week. At the same time I also need to get some grinding time in so that I can finally get some steel stuff in the pipeline. It's all a juggling act each and every day but hopefully it all gets done in the end. :)

Today I have a little wave of ti Wrunts done. These have plain basic grinds, just accents grinds on either side of the main bevel, no extra grinds on any of them. No stamps either...but, they do have patterns and anodizing. They are all different, with many different patterns and all different color combos ranging from simple one color treatments to all sorts of rainbow, fades and multi colored pieces. So, no choice here, I'll send you what I send you, but they are all very nice. A length of bead chain is included with each Wrunt....

The patterned ti Wrunts are a small batch so they will be one per customer please. They run $65 plus shipping and the link is below. Thanks and have a terrific weekend everyone!

Patterned Wrunts are Sold Out, thank you!

UV Dice

Howdy Folks,

Well, I'm back from my vacation finally. Jenny and I have never really taken a real vacation, ie, one longer than a couple of days, so this was something that was long overdue. We took a 5 day cruise up the coast of Maine on the Lewis R. French, an 1871 antique sailing schooner. Aside from the broom closet sized cabins and cramped bunks it was a fabulous experience and the food was great. The endless numbers of little islands covered in evergreens, classic lighthouses and hard working lobstermen zipping around from buoy to buoy were really cool and made for unbelievable scenery. It's hard to climb out of that mindset and get back to the world of work but I'm slowly coming around. ;)

So anyhow, today I have some more titanium Dice finished. These are drilled and on bead chain. They are anodized a rich UV purple. I'm getting close to the end of the dice and not sure I'll make any more of them or not, we'll see what happens in the next month or two. These are the usual $30 for each single die and the link is below. Thanks for your patience (as always!) and I appreciate folks stopping by.

UV Dice are Sold Out, thank you!