Is this the last of the Ti G3s? Ive been monitoring this all day. Went to dinner tonite, and now Ive missed out again. Im guessing at this rate, Ive no hope of getting one of these except aftermarket....
I just had my stamp recut as the old one was getting quite worn. They were able to take the old stamp and using EDM just burned a brand new face for me.
They also corrected the older one that I had that was supposed to be smaller. This was several years ago. Anyway, the person adjusting the file only made it squattier and left the length the same so I ended up with an elongated skinny version of the Atwood logo. So, a few weeks ago they wiped that one and made it the way I intended and now I have a half sized Atwood stamp. I used it on the current batch of Tipplers and will be using it here and there as needed. I love it!
Peter - was this the large run of titanium that you talked about in a previous comment? It is ridiculously hard to get one - even with hourly checking of the site - which is something I could only do today since I am home sick from work. Are people ordering multiples?
This was a pretty big run and yes some people have ordered two or three. I didn't want to limit it to one per person. I have so many Prybabies in progress right now that really and truly, everyone should just chill out. Everyone in the known universe is going to be able to get one by September I absolutely guarantee it.
And to help you chill, order a tippler (the purchase link is still up!) upon its receipt, stick it in the freezer for an hour and then add your favorite libation. ;-D
I'm sorry, I spaced out on lefties. I have some old fashioned steel Mini Prybabies coming in a couple of weeks and will do some lefties in those batches.
I missed this one too. I've been trying for months just to get a regular 'ol prybaby. I check in on my lunch hour at work and I always miss out. Here's to better luck next time.
Wow, old school Mini Prybabys! I just got one of the older ones second hand, and love the design. This should be VERY interesting. By chance, will they also have the older finishes? Keep up the great work!
Off topic question for you, Peter. Where can I get the brown paracord among other colors. In Boston, you can have any color you want so long at it is black. thanks.
Yes they did, all shipped the day after the sale. The post office almost never loses anything so just give them another day or two if it hasn't gotten there yet.
My first ever Ti-Wood.This ones going right on the Key ring when it arrives.
ReplyDeleteThanks Peter
We've seen the steel pry and the ti pry - any hints as to the new irons in the fire, as it were?
ReplyDeleteUp at 7:36, out at 8:10. Shoot!
ReplyDeleteI think this is the quickest sellout I have ever seen!
ReplyDeleteWell there weren't very many of them...
ReplyDeletePffft. There could have been almost a hundred and I bet we'd still have seen them flying.
ReplyDeleteI think one almost clipped me in the ear.
Grim, more G3 Prybabies in steel, WingNuts, FunnyBones and some other projects as well... ;)
ReplyDeleteI'm glad to hear there will be more WingNuts! I can't wait to see what these other projects are... XL dreams! Great work Peter!
ReplyDeleteWell, blast - looks like I need to budget for a Funnybone in the near future.
ReplyDeletePeter, are you making and funnybones in TI? Please do!
ReplyDeleteI hope some of the future projects will fit PERF-ect in my XL-lent collection.
ReplyDelete:)
Is this the last of the Ti G3s? Ive been monitoring this all day. Went to dinner tonite, and now Ive missed out again. Im guessing at this rate, Ive no hope of getting one of these except aftermarket....
ReplyDeleteI'd really like to see more superbugs! .. or something else like that. I want to pry, have a place for a bit, and a bottle opener.
ReplyDeleteDang, you really hit the sweet spot w/ the stamp! Deep and clear,love the way it shines...
ReplyDeleteStill love my steely G3!
I just had my stamp recut as the old one was getting quite worn. They were able to take the old stamp and using EDM just burned a brand new face for me.
ReplyDeleteThey also corrected the older one that I had that was supposed to be smaller. This was several years ago. Anyway, the person adjusting the file only made it squattier and left the length the same so I ended up with an elongated skinny version of the Atwood logo. So, a few weeks ago they wiped that one and made it the way I intended and now I have a half sized Atwood stamp. I used it on the current batch of Tipplers and will be using it here and there as needed. I love it!
Peter - was this the large run of titanium that you talked about in a previous comment?
ReplyDeleteIt is ridiculously hard to get one - even with hourly checking of the site - which is something I could only do today since I am home sick from work.
Are people ordering multiples?
Missed it, and kicking myself for not grabbing a green one. :(
ReplyDeletePlease tell me there are more of these on the way!
That new stamp looks great! Congrats to those who were able to purchase the Ti G3s. :)
ReplyDeleteThis was a pretty big run and yes some people have ordered two or three. I didn't want to limit it to one per person. I have so many Prybabies in progress right now that really and truly, everyone should just chill out. Everyone in the known universe is going to be able to get one by September I absolutely guarantee it.
ReplyDeleteAnd to help you chill, order a tippler (the purchase link is still up!) upon its receipt, stick it in the freezer for an hour and then add your favorite libation. ;-D
ReplyDeletePeter, any plain stone washed lefties in the batch?
ReplyDeleteI'm sorry, I spaced out on lefties. I have some old fashioned steel Mini Prybabies coming in a couple of weeks and will do some lefties in those batches.
ReplyDeleteA lefty mini Prybaby will definitely work :)
ReplyDeleteWow, it seems that one of new projects is revealed...
ReplyDeleteWhat about the titanium version of those old fashioned Mini Prybabies?
No ti version of the minis...
ReplyDeleteMini Prybaby!..Now we are cooking with gas!
ReplyDeleteLess is more.
I missed this one too. I've been trying for months just to get a regular 'ol prybaby. I check in on my lunch hour at work and I always miss out. Here's to better luck next time.
ReplyDeleteWow, old school Mini Prybabys! I just got one of the older ones second hand, and love the design. This should be VERY interesting. By chance, will they also have the older finishes? Keep up the great work!
ReplyDeleteOff topic question for you, Peter.
ReplyDeleteWhere can I get the brown paracord among other colors. In Boston, you can have any color you want so long at it is black.
thanks.
supplycaptain.com
ReplyDeleteGot mine today. Thanks! Looks great.
ReplyDeleteHey Peter...did all of these ship?
ReplyDeleteYes they did, all shipped the day after the sale. The post office almost never loses anything so just give them another day or two if it hasn't gotten there yet.
ReplyDeleteThanks for letting me know, brother. Looking forward to it.
ReplyDelete